18
the amount of ringing sig-
nals, press 5 . To set the
code number, press 6 . To
set an impulse time in sec-
onds, press 7, for minutes
press 8 and for hours press
9 . To set a temperature level,
press 0 .”
The announcement will be
repeated several times . It
can be interrupted at any po-
sition by entering a DTMF-
digit . During a voice mes-
sage, the entry will not
always be recognized, so
that the entry of the digit
eventually must be repeated .
Setting Procedures
For programming the param-
eters the phone line of the
TC easy Plus must be called
from a telephone . After en-
tering the code number, the
menu settings can be se-
lected by dialing the digit
“9” . The menu will start with
the following announcement
described as “setting an-
nouncement” in the exam-
ples:
”Settings . To set the
alarm phone numbers, press
1 for input 1 and press 2
for input 2 . To set the own
phone number, press 3 .
To set the answering ma-
chine mode, press 4 . To set
Operation
An overview of the opera-
tional sequences is printed
on the supplementary sheet .
The following examples show
how the below stated values
can be set starting from de-
livery state .
alarm phone no . 1
4711
alarm phone no . 2 0815
own phone no . 0235582224
a . machine mode off
ringing signals
7
code number
1873
impulse mode
35
sec .
temperature level
> 28 °C
