16
Impulse Time
Code Number
The four digit code number
can be set in the menu set-
tings (“6”) . In delivery state
the code number “0000”
is set . If the code number
“1111” is set, the testing of
the code number is left out
(see page 29) . The default
settings can be restored by
a procedure (see page 8) if
you have forgotten your code
number .
The connection will be re-
leased, after entering the
wrong code number three
times .
The number of ringing sig-
nals until answering an in-
coming call by the TC easy
Plus can be set in the menu
settings (“5”) . The default
setting is “2” .
If the answering machine
mode is activated, the set-
ting of the number of ringing
signals does not have any
meaning .
Ringing Signals
Operation
With the impulse time the
outputs can be activated for
a pre-determined time . For
instance, a door opener can
be activated for a short time
or a pump can be turned on
for several hours . The se-
lected impulse time (“7”, “8”
or “9” in menu settings) is
valid for all outputs . The im-
pulse time can be selected
from 1 second and up to 24
hours . In delivery state the
impulse time is set to 3 sec-
onds .
