12
State Request
After calling and seizure of
the telephone line as well
as correct entry of the code
number, one can check the
state of the connected de-
vices, switch the devices on
or off, or modify the individ-
ual settings of your TC easy
Plus – like alarm phone num-
bers, own phone number,
answering machine mode,
ringing signals, code num-
ber, impulse time or temper-
ature level .
The automatic call accept-
ance will be activated with
the pushbutton ”
” . The as-
signed LED lights up . The
device seizes the telephone
line after reception of the
programmed number of ring-
ing signals (see page 16 and
21) .
The LED ”
” starts blinking
after receiving the first ringing
signal . With the pushbuttons
S1 to S5 devices connected
to the output can be
switched on or off . The as-
signed LEDs S1to S5 indi-
cates the switching state
(LED lit = on) .
Operation
Call the TC easy Plus and
dial the code number .
”Please dial a digit .”
input device digit
1-5
or 6 request for tem-
perature
or # all devices
input state (not after
digit ”6”)
0 switch off device
1 switch on device
6 impulse mode
# state request
temperature or state
announcement
