RUSTA 623514700101, Руководство пользователя

Страница: 4 / 52

4
ENG
GAS CYLINDER
• Maximum gas cylinder size is H:800 x W:350 mm.
• The gas cylinder must not be dropped or handled carelessly.
• If the barbecue is not going to be used, the gas cylinder must be disconnected and the
safety cap refitted.
• The gas cylinder must never be placed in locations where it is exposed to temperatures
over 50°C. You should therefore not put the gas cylinder directly under the barbecue.
The gas cylinder must not be placed or stored in locations where there is a risk of fire or
sparks, for example.
• Do not smoke in the immediate vicinity of the gas cylinder.
• It is prohibited to make your own modifications to the gas cylinder. This can have fatal
consequences.
CONNECTING THE GAS CYLINDER TO THE BARBECUE
• Make sure that the gas cylinder’s valve is turned off.
• Connect the regulator to the gas cylinder’s valve.
• Connect the hose to the barbecue’s nipple.
• Check that the hose is not clogged, knotted or lying against any part of the barbecue
other than the nipple.
• Check for leaks in the gas cylinder, regulator, hose and barbecue before starting
• to barbecue. See the section “CHECKING FOR LEAKS”.
CHECKING FOR LEAKS
• Mix 50% soap with 50% water. Check that the gas valve on the gas cylinder is closed and
that the knob on the barbecue is turned off.
• Apply the soap solution onto the gas cylinder’s valve, regulator, hose and connector to
the barbecue.
• Open the gas valve on the gas cylinder. If there are small bubbles in any of the parts
mentioned above, there is a leak.
• Close the gas valve and tighten the hose connectors. Perform the test again. If there is
still a leak, contact your Rusta store.
• WARNING! Accessible parts may be very hot. Keep young children
away.
• The barbecue may only be used with an approved regulator kit and
comply with EN16129 with current version and national regulation.
• This appliance must be kept away from flammable materials during
use.
• When changing the gas cylinder which shall be carried out away from
any source of ignition.
• In the event of gas leak, turn off the gas supply.
• Parts sealed by the manufacturer or his agent shall not be manipulated
by the user.