Russound SMC-30, Руководство по установке

Страница: 123 / 144

Smart Media Console Installation Manual
113
Troubleshoot
Video
Problem Solution
I am using a TV with
my SMC, but I can’t see
anything�
Check that the correct input source is selected •
on the TV�
Check that the TV is correctly connected to the •
SMC� See Ch� 8 Connecting Video on how to
correctly connect the TV to the SMC�
Verify any other video/cable connections from •
your TV to the SMC�
I cannot see anything on
the TV, but I have volume
on my speakers�
Make sure the S-video and composite •
connections are connected to a TV or video
input when the SMC is turned on; if they’re not,
they will turn off automatically�
Ensure the connections are made, and then
turn off the SMC by pressing and holding down
the Power button for four seconds.
Check your input switches� •
The quality of the picture
on my display is poor�
(colors are bad, distorted
video, washed out, etc�)
See Ch� 15 • NVIDIA Display Setup for
procedures on how to change video settings for
your NVIDIA video card�
My SMC doesn’t
recognize my digital
video camera�
Check that the FireWire cable is correctly •
connected to the camera and to the SMC and
that the cable is in good condition�
Disconnect the camera from the SMC •
and reconnect it� If the camera is correctly
connected, the message New Hardware
Found appears�
My SMC doesn’t
recognize my analog
video camera�
Check that the A/V cable is correctly connected •
to the camera and to the SMC and that the
cable is in good condition�