
PREPARE THE PERSONAL BLENDER BOTTLE FOR USE
NOTE: Prior to use, the personal blender bottle should be dismantled and washed as instructed in
the CARE AND CLEANING section on page 8 of this manual. Following cleaning:
• Place the blender bottle on a flat surface with the open end facing up.
CAUTION: Do not place hot ingredients into the bottle. For your own safety we recommend
you do not process ingredients above 40°C. Do not fill past the 600ml mark.
• Place ingredients to be blended into the bottle; ice and frozen items first, solids seconds
and finally liquids.
CAUTION: Handle the sharp blade assembly with care.
• Fasten the blade assembly on the open end of the blender bottle and turn it clockwise until
it is tight.
• Sit the motor unit on a stable, level, dry surface. Turn the bottle upside down and place it on
the motor unit ensuring it is correctly seated with the recesses of the blade assembly
aligned with the tabs in the motor unit.
• Turn the bottle clockwise to lock it into place.
NOTE: The blender bottle may only be used in conjunction with the Single Serve function
• Press the On/Off button. The Single Serve button and On/Off button will flash, as will 0:00
on the display.
CAUTION: Hold the bottle!
• Before starting the motor, place and leave your hand on top of the bottle to prevent the
possibility of it being dislodged by the sudden movement of ingredients when the motor
starts.
NOTE: You may ‘Pulse’ ingredients when using the blender bottle by pressing and releasing the
Single Serve button repeatedly.
• Press and hold the Single Serve button to blend. The Single Serve and On/Off button will
glow steadily. The timer will begin counting up and the motor will automatically stop after 1
minute.
CAUTION: Wait until the blades come to a complete stop before proceeding further.
CAUTION: Ensure the bottle does not unscrew from the blade assembly when removing it
from the motor unit. If loose, turn the bottle clockwise again to tighten, then turn anti-
clockwise to remove the bottle and blade assembly from the motor unit.
• Turn the bottle anti-clockwise and lift upwards to disengage it from the motor unit.
• Stand the bottle on a flat surface with the blade assembly end facing upwards.
• Unscrew and remove the blade assembly and replace it with the drinking lid.
• Switch the blender off by pressing the On/Off button and disconnect the plug from the wall
power outlet.
6