
PREPARE THE BLENDER JUG FOR USE
NOTE: Prior to use, the blender jug should be dismantled and washed as instructed in the CARE
AND CLEANING section on page 8 of this manual. Following cleaning:
• Sit the motor unit on a stable, level, dry surface.
• Align the guide ribs inside the jug collar with the guide grooves on the motor unit and lower
the jug securely into place.
NOTE: The jug can be placed in a number of positions on the base.
CAUTION: Do not place hot ingredients in the jug. For your own safety we recommend
you do not process ingredients above 40°C. Do not fill past the 1500ml mark. If you do, the
contents may force the lid off when the motor starts.
• Place foods to be blended into the jug; liquids first then solids, leaving any frozen fruit,
vegetables and ice to last.
• Secure the lid by aligning the lid lock flaps over the tabs on either side of the jug. Press
down firmly to snap the lid lock flaps in place.
• Insert the cap into the opening of the lid. Rotate in a clockwise direction to lock it in place.
NOTE: Further ingredients can be added during the blending process via the lid opening.
However, do not start the blender without the cap as ingredients may be ejected through the hole.
• Plug the cord into a wall power outlet and switch the outlet on.
• Press the On/Off button to turn on the blender controls. The On/Off button will flash, as will
0:00 on the timer.
NOTE: The blender will power-off in 2 minutes if no buttons are pressed.
CAUTION: Hold the lid.
• Before starting the motor, place and leave your hand on the blender lid to prevent the
possibility of it being dislodged by the sudden movement of ingredients when the motor
starts.
• Select the function that best suits your task (see the PRE-PROGRAMMED FUNCTIONS
section of this manual on page 3 for more information).
• The function button will illuminate and the timer will count up to one minute and the motor
will stop. To finish the cycle early, simply press the function button again.
CAUTION: Wait until the blades come to a complete stop before proceeding further.
• Lift the jug upward to remove it from the motor unit.
• Switch the blender off by pressing the On/Off button and disconnect the plug from the wall
power outlet.
5