Russell Hobbs 13943, Инструкция, руководство по устранению неисправностей и гарантия

Страница: 8 / 16

8
check the HEPA filter
54 Hold the bin handle with one hand, hold the lid with the other.
55 Turn the lid about 15mm anti-clockwise, to align the arrow above the handle with
the left of the two grooves on the side of the lid.
56 Lift the lid out – it may be a bit stiff, as it has the HEPA filter attached to it.
57 Turn it over, so the HEPA filter is on top.
58 If the HEPA filter is dirty, remove it, clean it, and replace it.
59 Don’t handle the paper part of the HEPA filter, oils from
your skin can cause dust particles to adhere to it.
60 Keep the lid/filter upside down.
61 Grip the lid in one hand, grip the end of the HEPA filter in
the other, and turn the filter about a centimetre anti-
clockwise, to release it from the bayonet fittings.
62 Tap the plastic end of the filter gently against the inside of
the dustbin, to remove surface dirt from the filter.
63 Hold the HEPA filter under a running tap, so the water
runs over the outside surface only.
64 Leave it to air dry for 24 hours before replacing it.
65 To replace it, turn it clockwise into the lid, turn the lid and
filter over, lower them into the bin, then turn 15mm
clockwise, to align the arrow above the handle with the
rightmost groove on the side of the lid.