Russell Hobbs 13943, Инструкция, руководство по устранению неисправностей и гарантия

Страница: 13 / 16

13
replace the base
38 This can be done “as is”, or, if you find it awkward, try putting the cleaner back into
upright mode.
39 Put the front of the base on first, then the rear.
40 Press the rear to engage the clips at the sides.
41 Replace the screws. The short screws at the rear of the base, the longer screws
towards the front.
42 Screw them in firmly, but don’t overtighten them.
43 That’s it – done.
don’t touch
,
There’s a seal on the back of the cleaner that seems
to fascinate people – don’t touch it .
44 It’s there to assist the manufacturing process.
45 Don’t touch it – you’ll break the cleaner.
46 It’s not meant to come off, but you can force it off if
you try to turn it.
47 If you succeed, the cleaner will stop working.