Russell Hobbs 13943, Инструкция, руководство по устранению неисправностей и гарантия

Страница: 12 / 16

12
here’s how:
29 Put the belt between the guides.
30 Slip the end of the belt over the brush roller.
31 Hold the left side of the brush roller in your right hand.
32 Put two fingers of your left hand on the long side of the left end piece, and your
thumb on the corner of the casing.
33 Pull the left of the roller against the belt, till you can just get the left end piece into
the start of the left set of grooves.
34 Hold the left end piece in place with your left hand.
35 Slip the right end piece into its
grooves.
36 Push the left side fully into its
grooves.
37 Turn the brush roller to check the
belt moves freely.
,
If you’ve jumped here from page
11, and just want to check for, or
clear a blockage, you’ll see the
other end of the tube on the right
of the cleaner, just behind the
brush roller. You shouldn’t need
to disturb the brush roller to get
to the tube.