Russell Hobbs 13943, Инструкция, руководство по устранению неисправностей и гарантия

Страница: 6 / 16

6
set the floor type
26 Slide the brush height control to the bare floor or accessories setting for bare floors,
or to long, medium, or short pile, for carpet.
Tilt the handle back, to raise the cleaner slightly from the floor, to make moving the
brush height control easier.
27 Use the bare floor or accessories setting for the hose, tubes, and accessories, to
prevent the brush continually hitting the surface it’s sitting on.
plug in
caution
If you’ve inadvertently kicked the switch, the cleaner may start up when you
plug it in – press the switch
3
with your toe to switch it off.
28 Use a socket near the area to be cleaned, plug in, and switch the socket on, if it’s
switchable.
kick the pedal
29 Stand behind the cleaner, press the pedal down with your toe, ease the
handle back, then take your toe off the pedal.
30 The cleaner is now ready to use upright.
switch on
31 Press the switch
3
with your toe to switch it off
cleaning
32 Move the cleaner over the floor, cleaning a small area.
33 When you move to a new area, overlap the previous area, to make sure none of the
floor is missed.
switch off
34 If you’ve finished, if you want to change the brush height for a different floor
covering, if you want to change from using it upright to using the hose, or if you just
want to stop for a cup of tea, press and release the switch with your toe, to turn the
motor off.
changing the floor type
35 Switch off and adjust the brush height control before moving the cleaner to a
different floor covering.
36 Using the “wrong” setting won’t do any harm, but you won’t get the performance
you would with the correct setting.