Russell Hobbs 13943, Инструкция, руководство по устранению неисправностей и гарантия

Страница: 3 / 16

3
16 Don’t leave the cleaner in direct sunlight.
17 Don’t use the cleaner if it’s damaged or malfunctions. If the cable or plug is
damaged, the cleaner must be returned in order to avoid hazard (see “service” on
the back page).
household use only
before using for the first time
Remove the packaging, but keep it till you’re sure the cleaner is working properly.
filters
It’s vital you keep the filters clean. If the filters get blocked, you’ll lose suction rapidly.
We’ve made them easy to remove, and easy to clean – the rest is down to you.
count the bits
The box should contain the cleaner itself, the handle, the extension tube, the crevice
tool, and the small brush. make sure you’ve got them all before you dispose of the
packaging.
fit the handle
1 You’ll need a cross-head screwdriver for this.
2 Unscrew the screw from the pillar at the top of the cleaner.
3 Align the grooves and raised areas in the bottom the handle with those inside the
top of the cleaner.
4 Slide the handle into the cleaner.
5 Push the screw through the hole in the centre bottom of the handle, and screw it
back into the pillar – don’t overtighten it.
6 If you ever need to remove the handle, remove the screw from the central hole, slide
the handle away from the top of the cleaner, then replace the screw in the pillar, to
prevent its loss.
7 Don’t mess about with the screws on either side of the central hole – they hold the
handle assembly together.