3
Airflow-IQ Start-up & Commissioning Guide
AIRFLOW-IQ Electronic Air Measuring Station
with BACnet Actuator and Class 1A Damper
Refer to the Ruskin .com website for the most up-to-date version of this document .
APPLICATIONS
Ruskin model AIRFLOW-IQ is a turn-key solution that combines the features of Ruskin’s TDP05K air flow and tem-
perature measuring probe(s) with Ruskin’s CD50 or CD60 control damper and Ruskin’s VAFB24-BAC RAMS Air Mea-
surement BACnet actuator/controller . The complete unit is factory assembled and calibrated to provide effective
setpoint air flow control from 0 to 5000 FPM (0 to 25 m/s) using analog or BACnet interface . The ultra low-leak,
class 1A rated CD50/CD60 damper meets leakage requirements of the International Energy Conservation Code .
This product is designed to be installed in almost any location that airflow needs to be measured . Measurements
may be improved by following the placement guidelines in this document . When adequate space is not available,
more probes and/or sensors are recommended .
Installation of the AIRFLOW-IQ Airflow Measuring Station placed directly downstream of heating coils, cooling coils,
or humidifiers is not recommended .
NORTH AMERICAN EMISSIONS COMPLIANCE
United States
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part
15 of the FCC Rules . These limits are designed to provide reasonable protection against harmful interference when
this equipment is operated in a commercial environment . This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications . Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his/her own expense .
Canada
This Class (A) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment
Regulations .
Cet appareil numérique de la Classe (A) respecte toutes les exigences du Règlement sur le matériel brouilleur du
Canada .
All Airflow-IQ systems are supplied with a TDP05K Primary Display that is factory wired and may be connected
to up to 15 TDP05K Ancillary probe(s) . The Primary Display is configured at the factory with customer supplied
parameters . For normal applications the Primary Display’s configuration should not need to be modified in the
field . However, if field configuration is necessary please reference the TDP05K Installation and Maintenance
Manual available at www .Ruskin .com, at this URL: http://www .ruskin .com/catalog/servefile/id/6766 or via this
QR Code:
APPLICATIONS
Ruskin model AIRFLOW-IQ is a turn-key solution that combines the features of Ruskin's TDP05K air flow and
temperature measuring probe(s) with Ruskin’s CD50 or CD60 control damper and Ruskin's VAFB24-BAC
RAMS Air Measurement BACnet actuator/controller. The complete unit is factory assembled and calibrated
to provide effective setpoint air flow control from 0 to 5000 FPM (0 to 25 m/s) using analog or BACnet
interface. The ultra low-leak, class 1A rated CD50/CD60 damper meets leakage requirements of the International
Energy Conservation Code.
This product is designed to be installed in almost any location that airflow needs to be measured.
Measurements may be improved by following the placement guidelines in this document. When adequate space is
not available, more probes and/or sensors are recommended.
Installation of the AIRFLOW-IQ Airflow Measuring Station placed directly downstream of heating coils, cooling
coils, or humidifiers is not recommended.
NORTH AMERICAN EMISSIONS COMPLIANCE
United States
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
this equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his/her own expense.
Canada
This Class (A) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la Classe (A) respecte toutes les exigences du Règlement sur le matériel brouilleur du
Canada.
AIRFLOW-IQ
Electronic Air Measuring Station
with BACnet Actuator and Class 1A Damper
Refer to the Ruskin.com website for the most up-to-date version of this document.
2
All Airflow-IQ systems are supplied with a TDP05K Primary Display that is factory wired and may be connected to
up to 15 TDP05K Ancillary probe(s). The Primary Display is configured at the factory with customer supplied
parameters. For normal applications the Primary Display’s configuration should not need to be modified in the
field. However, if field configuration is necessary please reference the TDP05K Installation and Maintenance
Manual available at www.Ruskin.com, at this URL: http://www.ruskin.com/catalog/servefile/id/6766
or via this QR Code:
Airflow-IQ Start-up & Commissioning Guide
3
