Rush STROBE 1 5x5, Руководство пользователя

Страница: 11 / 44

RUSH STROBE 1 5x5 user manual 11
Physical installation
Read Safety information on page 5 before installing the
fixture.
This fixture may only be installed by qualified and experienced
professionals.
The fixture is designed for indoor use only and must be used in
a dry location with adequate ventilation. Ensure that none of the
fixture’s ventilation slots are blocked.
Fasten the fixture securely. Do not stand it on a surface or leave
it where it can be moved or can fall over. Attach a securely
anchored safety cable to the fixture if it is installed in any
location where it may fall and cause injury or damage if the
primary attachment fails. If installing an array of multiple
STROBE 1 5x5s, ensure that each of then has a safety cable
that is attached to the load bearing structure and
not to an
adjacent fixture!
Martin™ can supply suitable safety cables and rigging clamps for use with the
fixture (see ‘Accessories’ on page 39).
The fixture can be oriented at any angle. Ensure that the mounting surfaces
and hardware can support at least 10 times the weight of all fixtures and
equipment to be installed on them.
Joining fixtures
Multiple STROBE 1 5x5s can be joined together into
an array. Note that a single STROBE 1 5x5 fixture
must never bear the weight of more than four other
STROBE 1 5x5s that are hung beneath it, and must
never bear the weight of horizontally adjacent fixtures.
1. When hanging one STROBE 1 5x5 beneath
another, remove the brackets at the top of the
fixture.
2. Each fixture has four built-in attachment hooks —
two on the bottom and two on one side — for
connecting fixtures. These can be retracted (

)
or extended (
②
) using a 4 mm L-shaped hex