Rush STROBE 1 5x5, Руководство пользователя

Страница: 19 / 44

RUSH STROBE 1 5x5 user manual 19
Fixture setup
This section explains the fixture characteristics that can be set that determine
how it can be controlled and will behave. These settings are made using the
menus available from the control panel, and are retained, even when the
fixture is powered off.
Using the control menus
See the map of the control menu structure in Control menus on page 34.
To access the control menus, press the MENU button. Navigate the menu
structure using the MENU, ENTER, DOWN and UP buttons. Select any
required menu option using the ENTER button. To return to a higher level in
the menu structure without any change press the MENU button (this will occur
automatically after an interval where there has been no user input.).
DMX addressing
The DMX address, also known as the start channel, is the first channel used to
receive instructions from a DMX controller. The fixture can be controlled using
signals sent by a DMX controller on a number of channels (4, 25 or 29,
depending on the DMX mode that has been set). Each DMX controlled fixture
must have a DMX address set. For example, if a fixture has a DMX address of
10 and it is in 4-channel DMX mode, then it uses channels 10, 11, 12 and 13.
The following fixture in the DMX chain could then be set to a DMX address of
14.
For independent control, each fixture must be assigned its own control
channels. Two fixtures of the same type may share the same address, if
identical behavior is desired. Address sharing can be useful for diagnostic
purposes and symmetric control, particularly when combined with the inverse
pan and tilt options.
The DMX address is configured using the menu in the control panel.
To set the fixture’s DMX address:
1. Select
and press the ENTER button.
2. Use the UP and DOWN buttons to select the address (1 to 512).
3. Once the address has been selected, press the ENTER button to set it (or,
to return to a higher level of the menu structure without any change press
the MENU button).