Ruris AS130FULL, Руководство пользователя

Страница: 31 / 40

EN
11
5.2 LIFT TIG WELDING
The TIG welding process is a common one and is distinguished by the high quality and
a pleasant visual appearance of the welding beads.
For this type of welding, use a TIG gun:
Step 1: Connect the power cord to a power source.
Step 2: Connect the "B" ground clip to the positive (+) terminal and the workpiece.
Step 3: Connect the TIG gun "C" to the negative (-) terminal and to the gas cylinder.
Step 4: Set the "ON / OFF" switch to the "ON" position and make sure that the LED
indicating the power source lights up.
Step 5: Switch the device to LIFT TIG mode.
Step 6: After completing the welding process, remove the TIG gun from the ground
source, put the mask down and set the “ON / OFF” switch to the “OFF” position.
Gas
B
C