Ruris AS130FULL, Руководство пользователя

Страница: 36 / 40

EN
16
6 MAINTENANCE AND TROUBLESHOOTING
The degree of use and working environment must be taken into account when
maintaining the device. Proper use and regular maintenance will help you avoid
unnecessary damage to the device.
Note: Disconnect the device from the mains before operating the power cords.
6.1 DAILY MAINTENANCE
1. Visually check the condition of the welding gun. Remove the welding splashes from
the contact tip and clean the gas nozzle. Replace damaged parts with new ones.
2.Check the tightness and insulation of the welding gun connections and the ground
cable.
3. Check the power cord and welding cables. If they are damaged, they must be replaced.
6.2 TROUBLESHOOTING
Problem Cause
The wire feed does not
work
The feed cylinders, wire sleeve or contact tips may be
defective.
1.Check whether the feed cylinders are too tight or too
loose.
2 Check that the groove of the feed cylinders is not too
worn or that the size for the filler wire used is incorrect.
3 Check that the wire sleeve is the correct size and is
not blocked or worn. Replace if necessary.
4 Check that the contact tip is suitable for the wire used
and if it is not worn or blocked.