RUPTELA Trace5 Скачать руководство пользователя страница 35

Страница: 35 / 44

Alternatively, the device can be configured using SMS commands. Please refer to the following documents

for an in-depth description:

Device configuration via SMS

SMS commands list

Updating Firmware

We highly recommend using the newest firmware to take advantage of our newest functionalities and

improvements. Device firmware can be updated in the following ways:

Automatically when using a Device Center version that is newer than the firmware

Manually by sending a firmware file to the device

Over-the-air using your fleet management software

The device will not send any data during firmware updates.

File Extension

Firmware file extension for Trace5 devices:

Trace5-LTM (pre-revision):

.efwa5

Trace5 NA:

.efwb5

Trace5 (all other versions):

.efwd5

Updating Firmware Automatically

If the Device Center is newer than the detected device firmware, it will suggest updating the firmware.

Click

Update firmware

to update the firmware. If the firmware is not updated, you will not be able to

load and save configuration files from/to the device.

This method does not require an internet connection. This allows you to update the firmware at any

time or location if you have the newest Device Center.

If the Device Center is older than the firmware, you will not be able to load and save configuration

files from/to the device. You will need to update the Device Center.

If you skipped the automatic firmware update suggestion and you do not want to update the

firmware manually, click

Send FW

and then

Cancel

. The Advanced configurator will suggest again

to update the firmware.

Содержание Trace5













































Результаты поиска

Содержание Trace5

Отзывы:

Похожие инструкции для Trace5

Бренды по названию

Популярные бренды

RUPTELA Trace5, Руководство пользователя

Результаты поиска

Содержание Trace5

Отзывы:

Похожие инструкции для Trace5

Бренды по названию

Популярные бренды