RUPTELA Trace5, Руководство пользователя

Страница: 5 / 44

4
For configuration use cables that were purchased from Ruptela. Ruptela is not responsible
for any harm or damage caused while using the wrong cables.
Attention! Do not connect the wires marked red (power supply) and black (chassis) to the
wrong battery poles. The device has reverse polarity protection, however, if connected
incorrectly, the device will not work.
Disconnect the device from the power supply before dismounting it.
To disconnect the device from the power supply, you need to disconnect the 12 Pin
connector from the device or disconnect the wires from the vehicle’s power supply.
Ensure that the cross-sectional area of the wires is at least 18 AWG (0.75 mm 2 ).
Install the device in a restricted access location, not accessible or visible to the driver.
This crossed-out wheelie bin symbol means that waste equipment should not be disposed of
with your other household waste. The product must be taken to separate collection points at
the product’s end-of-life.
Notations
The following notations are used in this document to highlight important information:
Bold text
Used to indicate user interface elements or for emphasis.
Italic text
Used to indicate items that belong to a list and can be selected.
Note
Used to indicate items that belong to a list and can be selected.
Caution
Used to mark actions that require caution when handling the product.
Warning
Used to mark actions that may cause irreversible damage if performed incorrectly.
Tip
Suggestions on how to proceed.
Acronyms and Abbreviations
2G – Second Generation Cellular Technology
3G – Third Generation Cellular Technology