RUPTELA Trace5, Руководство пользователя

Страница: 31 / 44

30
Then, decide which conditions you wish to use for engine state detection.
DIN1/DIN2/DIN3/DIN4
If ticked, the condition is true when the configured DIN detects a constant
input voltage.
Default value: DIN4 enabled, other inputs disabled
Movement sensor If ticked, the condition is true after detecting movement.
Default value: Enabled
CAN ignition If ticked, the condition is true if the engine on state is provided by CAN
data. Active only when at least one CAN interface is turned on.
Default value: Disabled, inactive
Power supply voltage > If ticked, the condition is true if the power supply voltage is greater than
the entered value (in mV).
Default value: Disabled
RPM > If ticked, the condition is true if the RPM value provided by CAN data is
greater than the entered value. Active only when at least one CAN
interface is turned on.
Default value: Disabled, inactive