Rupes FR32E, Инструкция по эксплуатации и техническому обслуживанию

Страница: 8 / 34

8
TECHNICAL DATA ENGLISH
TYPE FR32E
PROTECTION CLASS II
OPERATING VOLTAGE 230 V - 50 Hz
ABSORBED CURRENT 4,3 A
ABSORBED POWER 900W
ELECTRONIC OVERLOAD PROTECTION YES
ELECTRONIC SPEED CONTROL YES
ROTATION RPM 1500 ÷ 4000
BUFFER PAD AND BUFFER DIAMETER MAX mm 75
SPINDLE THREAD M14
WEIGHT Kg 1,8
SAFETY AND ACCIDENT PREVENTION INSTRUCTIONS
The safety and accident prevention instructions are reported in the
“SAFETY INSTRUCTION” booklet which forms an integral part of
these documents; the operating instructions indicate the additional
information required specifically for use of the tool.
Never use the tools without the safety guards (5-6).
Any operations carried out on the tool must be effected with the power
supply disconnected.
Before starting the tool, ensure that it is held tightly and not in contact
with the work surface.
Hazardous dust may form during use regulation safety devices for
personal protection and observe safety norms valid for the processed
work material.
Due to risks that may arise during polishing, we recommend the con-
stant use of P.S.D. (personal safety devices such as gloves, headpho-
GENERAL WARNINGS
nes, goggles, face masks, etc.) according to laws in force to prevent
or reduce accident probability.
Warning! the appliance continues to work for a few seconds after it
has been switched off!
CORRECT USAGE
The tools must only be used for polishing painted surfaces.
The tools must be used in a dry environment only.
Before use make sure that the disc pad work specifications are
compatible to the tool and are not broken or worn. Make sure they
are assembled, handled and stored with care according to the
manufacturer's instructions.
Make sure the work piece is sufficiently fastened.
The user bears sole responsibility for any damage or accidents
resulting from incorrect use.
8