RUNLUCKY SHOWER SOFTENER
4
2.3. Pipeline Installation Instruction
2.3.1 Installed after Water Heater
Remind: No water flows out when the shower softener in regeneration status (about 1 hour). If there is
no spare faucet in the bathroom, it is suggested to have a spare outlet reserved when installation.
Installation steps:
2.3.1.1.The water mixing valve is closed. Dissemble the nut between sprinkler and water mixing valve
with adjustable spanner as shown in Figure 4.
2.3.1.2.Tighten the nut of sprinkler on the outlet of shower softener, as shown in Figure 5.
2.3.1.3.Connect the outlet of water mixing valve with the inlet of shower softener by braided tube or
corrugated tube. As the shower softener installation location relates to the inlet pipeline connection, take
some samples of common installation types for reference.
a.It is the schematic view of spare faucet available in installation place. The shower softener could be
installed either at the right or left side of shower softener, as shown in Figure 6 and 7.
