RUNLUCKY SHOWER SOFTENER
1
Notice
1. If it is necessary to buy spare parts for installation, please select the parts with good quality.
2. The thread of the product is standard. When the ender user buys the matched accessories, please
select it with good quality to prevent the accessories can
’
t be matched, thread cross, etc..
3. User manual is a guiding document for the correct use of the product, please do the usual operation,
check and maintenance strictly in accordance with the manual.
4. It is recommended to select professional personnel appointed by authorized dealer to install the
product. When installation, ender user should inform the detail information of installation wall, such
as the material of wall, distribution of water pipeline and wire, etc.. If the product is installed by ender
user himself, if there is any problem happened during the installation, we will not take any
responsibility.
5. The product is suit for municipal tap water, water pressure is 0.1~0.6 MPa, water temperature is
5
℃
-70
℃
. It is forbidden to use it out of the range.
6. The product is only suitable for indoor installation and use. It should be put in a cool and dry place,
avoid direct sunlight. The pipeline connected to the product should be kept away from light source,
heat source, corrosive environment and crash with sharp objects.
7. There is a sewer within 1 meter around the product which is used for drainage.
8. In any case, do not spray water to the product.
9. When the product is in failure, please cut off the water and contact the local dealer in time.
10. In order to prevent the
regeneration can’
t achieve the desired effect, please use the grain salt
provided by our company as possible.
11. When the transformer or cable damaged, the replaced one must be from our company.
12. Due to the product need electricity in use, please put the transformer in a place where no water can
spray.
13. If the consequences happened due to not operating according to the above notes, our company will
not take any responsibility.
