V1.0
Rungu Taillight Installation and Operation
Copyright 2017 Standard Bearer Machines, LLC
Page
5
of
15
Installing the light to a Rungu Cargo Rack
–
Single Battery Models (Rungu
Dualie Steep/Rugged)
Tools required
•
5mm hex wrench
Installation
The taillight kit comes with the Cargo Rack mount with socket, two M6 screws and washers, taillight and
charging cable as shown below.
First, use the 5mm hex wrench to remove the two screws holding the Cargo Rack stiffener in place in the
rear of the Cargo Rack.
