V1.0
Rungu Taillight Installation and Operation
Copyright 2017 Standard Bearer Machines, LLC
Page
9
of
15
Installing the light to a Rungu Cargo Rack
–
Dual Battery Models (Rungu
XR Models)
Tools required
•
5mm hex wrench
•
10mm socket wrench
•
Needlenose pliers
Installation
The taillight kit comes with the Cargo Rack Dual Battery mount with socket, two M6 screws, nuts and
washers, taillight and charging cable as shown below.
First, open the rear battery case; disconnect and remove the rear battery. Looking under the hinge of
the battery case door you’ll see two
hole-plugs. Use a pair of needle nose pliers to remove the hole-
plugs. Discard the plugs when removed.
