V1.0
Rungu Taillight Installation and Operation
Copyright 2017 Standard Bearer Machines, LLC
Page
10
of
15
From the back of the cargo rack, insert the taillight mount so that the two circular bosses align with the
two unplugged holes. Install the first screw and washer from the inside of the battery case through the
hole in one of the bosses. Secure the screw with the end of the 5mm hex wrench, then finger tighten the
nut on the outside of the cargo rack. The washer and hole in the mount are offset from the main hole to
allow the washer to grip the inside of the case.
