V2.0
RUNGU Electric Juggernaut Owner Manual
–
2019 model year
Copyright 2019 Standard Bearer Machines, LLC
27
28.
Inflate the Fat Tires between 5 and 10 PSI (34 to 69 KPa)
Note: Tire pressure plays a very important role in how you enjoy your Rungu Electric Juggernaut. If
you plan to ride mostly on soft ground like sand or snow, use a tire pressure between 5 (34 kPa) and 6
PSI (41 kPa) for best traction and control as well as minimizing tread wear. Use 10 PSI (69 kPa) if you
plan to ride on harder surfaces like rock or dirt road. On harder surfaces, a higher pressure minimizes
tread wear and improves the range of your Electric Juggernaut.
CAUTION: AVOID UNDERINFLATING AND OVER INFLATING THE TIRES. UNDER INFLATION (BELOW 5
PSI) WILL PREVENT THE TIRE FROM SEATING ON THE TIRE AND PREVENT YOU FROM RIDING ELECTRIC
JUGGERNAUT. OVER INFLATION (MORE THAN 15 PSI
–
103 KPA) MAY RESULT IN TIRE BLOW-OUT
WHILE RIDING.
29.
Loosen the Seat Post Clamp by opening the lever. Insert the seat post and adjust to the height
that suits you, then tighten the clamp by closing the lever.
Note: Failure to tighten the seat post can result in discomfort while riding Electric Juggernaut.
WARNING: DO NOT EXTEND THE SEAT POST BEYOND THE MAXIMUM HEIGHT LIMIT BEFORE
CLAMPING. THIS CAN RESULT IN THE SEAT POST BREAKING AND RESULTING IN SEVERE INJURY OR
DEATH.
30.
If the model you purchased includes optional mud flaps (HC+, Overland, Rubicon) or the Rungu
Cargo Rack with the range-extending battery, continue to the additional instructions for
installation. If you have purchased (or you also have the) the Rungu Cargo Rack, please refer to
the Rungu Cargo Rack installation instructions for assembly.
31.
Before riding, refer to the section
