V2.0
RUNGU Electric Juggernaut Owner Manual
–
2019 model year
Copyright 2019 Standard Bearer Machines, LLC
72
Adjusting the Front Suspension
The front suspension has two manual controls that can change ride and handling characteristics.
Looking from above astride the Electric Juggernaut, the right-side knob controls the stiffness of the
suspension. The left side switch is used to disable/enable the suspension.
To stiffen or loosen the suspension, turn the right-side knob clockwise or
counter-clockwise respectively. All Electric Juggernauts ship with the
suspension at the loosest setting. If you find that the front-end dives too
much, or that you are having difficulty turning on soft ground (sand,
snow), increase the stiffness of both forks by turning the knob clockwise.
When activated, the optional front
suspension for the Electric
Juggernaut makes cornering on hard
surfaces smooth and improves
control on soft sand. Under some circumstances such as when the
rear wheel drifts sideways in very soft sand, the suspension may
make it difficult to stay upright. Under these circumstances, Rungu
recommends disabling the front suspension by turning the switch from the Open position to the Lock
position.
Using the parking brake switch
The front or rear hydraulic brake (or both) levers have a parking brake switch. To operate the switch,
hold in the brake lever and flip the switch. The switch holds the brake lever in place, which holds the
rotor in place and prevents Electric Juggernaut from moving when parked. The parking brake is very
useful when parking on angle. REMEMBER to switch off the parking brake before riding. Engaging either
front or rear brake disables the motor.
NOTE: Riding with the parking brake engaged produces significant wear on the brake pads leading to a
decrease in brake pad life and stopping power. Warranty DOES NOT cover replacement brake pads.
