Rungu Juggernaut1, Руководство пользователя

Страница: 49 / 82

V2.0 RUNGU Electric Juggernaut Owner Manual – 2019 model year
Copyright 2019 Standard Bearer Machines, LLC 49
6. Plug the battery charger into an AC wall outlet using the provided AC cord.
WARNING: DO NOT LEAVE CHARGER PLUGGED INTO WALL AFTER CHARGING
– THIS MAY
DAMAGE THE BATTERY CHARGER. UNPLUG OR OTHERWISE DISCONNECT THE CHARGER
FROM AC POWER WHEN IT IS NOT IN USE.
FAILURE TO DO SO WILL VOID YOUR
WARRANTY.
7. A red light should appear right after you plug in the battery. Wait until the light on the
charger turns green for a full charge. Depending on the power of your charger and the
amount of charge remaining in your battery, you should expect a full charge in fewer than 4
hours. If it fails to charge, please look at the troubleshooting section for further information.
NOTE: You do not always need to wait for a full charge, you may use your batteries at any
time since the batteries have no memory. For extended use, it will always be better to get
a full charge so that you do not deplete your batteries too far when you ride. It is better in
the long run to use less than 80% capacity of the battery when riding if possible
.
CAUTION: REFER TO THE BATTERY CARE SECTION IN THIS DOCUMENT FOR MORE
INSTRUCTIONS ON HOW TO MAXIMIZE THE LIFE OF YOUR BATTERIES.
WARNING: IF YOU FULLY CHARGE THE BATTERY, DISCONNECT THE BATTERY FROM
THE CHARGER AS SOON AS POSSIBLE OR WITHIN A FEW HOURS OF COMPLETING A
FULL- CHARGE. FAILURE TO DO SO MAY CAUSE THE BATTERY TO SWELL AND FAIL. A
SWOLLEN BATTERY IS NOT COVERED BY THE WARRANTY.