V2.0
RUNGU Electric Juggernaut Owner Manual
–
2019 model year
Copyright 2019 Standard Bearer Machines, LLC
45
Operating Electric Juggernaut
NOTE: Your Electric Juggernaut ships with the batteries partially discharged to allow longer storage.
Before riding, fully charge the battery or batteries prior to your first ride.
Charging Your Main Battery
–
Single battery units (Standard, HC+)
1.
Make sure your charger is set to
the correct voltage for your country’s power requirement.
On the back of your battery charger is an input voltage switch. Check that the voltage
switch is switched correctly for your voltage standard
–
110V refers to 110-120VAC 60Hz
common to North America. 220V refers to 220-240VAC 50Hz common to Europe and Asia.
If the voltage input switch is set incorrectly for your voltage standard, use the blade of a
small screwdriver to push the switch to the correct setting.
2.
Use the keys supplied with your Electric Juggernaut to unlock the battery case from the
front. You’ll find
the lock under the Main Battery Case. Use some pressure to retain the
Battery Cover while turning the key.
