Runco Video Xtreme VX-44d, Руководство по установке и эксплуатации

Страница: 107 / 120

External Control
Runco VX-44d/-55d Installation/Operation Manual 91
PRE
L
IMINAR
Y
Mi s cellaneou s Command s
DISPLAY? NA NA Returns display device input source
value, as follows:
1 = Auto
10 = VX-44d
11 = VX-55d
HWVER? NA NA Returns hardware version number
INRES? NA NA Returns input resolution
MODEL? NA NA Returns product model name
OUTRES? NA NA Returns output resolution
SERNUM? NA NA Returns DHD Controller serial number
SWVER? NA NA Returns software version number
SYSSTATE? 0/4 NA Returns current system state
0 = Off
1 = Initializing
2 = On
3 = Powering Down
4 = Error
TRIGGER 1/3 YES Assigns trigger to currently-selected
aspect ratio
The following serial commands are meant to emulate buttons on the remote control or DHD Con-
troller front panel. Each button has its own serial command, so effectively it is as if you were using
the IR remote only you’ll be doing so via serial commands. These commands provide active OSD
responses just like the IR remote.
DOWN NA NA Down-Arrow ( ) key
ENTER NA NA ENTER key
EXIT NA NA EXIT (RETURN) key
LEFT NA NA Left-Arrow ( ) key
MENU NA NA MENU
RIGHT NA NA Right-Arrow ( ) key
UP NA NA Up-Arrow ( ) key
Table 6-1. S erial Command s (continued)
Command
Parameter
(min/max)
Value
S tored?
De s cription