Runco LightStyle LS-12d, Руководство по установке и эксплуатации

Страница: 91 / 152

Operation
LightStyle™ LS-12d Installation/Operation Manual 75
PRE
L
IMINAR
Y
Table 4-2 lists the x- and y-coordinates for each color temperature preset in “Simple”
mode.
• Color Gamut: Select Color Gamut from the Display Color - Common Settings menu to
select a color gamut (range) that may be different from the default color gamut.
Each setting defines the precise hue of each primary (red, green and blue) and
secondary (yellow, cyan and magenta) color component used to generate the millions
of colors produced in displays. Changing this setting relocates the “triangle” for
possible colors (see Figure 4-7). For example, changing the x/y coordinates for red
moves the color closer to either orange or violet, which in turn affects all displayed
colors having a red component.
• The default setting, Auto , automatically chooses the appropriate color gamut:
• S MPTE C for NTSC, 480i and 480p sources.
• EBU for PAL, SECAM, 576i and 576p sources.
• REC709 for all other sources.
• Select REC709 to use the color gamut defined in ITU-R BT.709-5.
• Select S MPTE-C to use the color gamut defined in SMPTE 170M-1999.
• Select EBU to use the color gamut defined in EBU Tech. 3213-E.
• Select Native to use REC709 for cyan, magenta, and yellow and uncorrected values
for red, green, and blue.
• Select PCE to use the Personal Color Equalizer feature of the LS-12d. PCE lets you
define a custom color gamut. Refer to the next section, PCE , for instructions on how to
do this.
Table 4-2. Color Temperature Pre s et s and A ss ociated Color Point s
Color Temperature Pre s et
A ss ociated x/y Value s
x y
3200K 0.423 0.404
5500K 0.332 0.348
6500K 0.313 0.329
7500K 0.299 0.315
9300K 0.284 0.298
1. The Color Gamut setting only affects 2D content.
2. The Dimension Digital Controller uses the Color Gamut settings
for all display modes on a given input.
Note