Runco LightStyle LS-12d, Руководство по установке и эксплуатации

Страница: 133 / 152

External Control
LightStyle™ LS-12d Installation/Operation Manual 117
PRE
L
IMINAR
Y
6.2
Using Discrete IR
Codes The Dimension Digital Controller accepts commands in the form of IR signals that conform
to the NEC protocol. Each Dimension Digital Controller remote control button has an NEC
control code associated with it.
You can use these codes to program a third-party, “universal” remote control unit to work
with the Dimension Digital Controller. These third-party products usually come with a
computer software application for this purpose. For more information, consult the
documentation provided with the remote control unit.
IR Command Protocol The IR control codes have the following characteristics:
• Each code consists of the following:
• A leader pul s e (a modulated pulse of 9 ms followed by a non-modulated pulse of
4.5 ms);
• 16 addre ss bit s . The default address is 82 09 (0x2011, binary
00100000 00010001). To change it, select Remote Control from the Miscellaneous
menu (in the Service menu) and follow the steps given on page 83;
• 16 data bit s : eight (8) bits for the command followed by the logical inverse of the
command; and
• An end pul s e (a modulated pulse of 0.56 ms, similar to the modulated pulse in the
‘0’ and ‘1’ bits).The end of the modulated pulse constitutes the end of the data
transmission.
• The carrier frequency is 38 kHz, with the modulated pulses having a 33% duty cycle.
• Commands are sent at a maximum rate of 9 Hz.
For example, here is the NEC control code for the ON button on the Dimension Digital
Controller remote control unit (assuming the default address is used):
Figure 6-1 shows the pulse train for this command.
Figure 6-1. NEC Protocol Me ss age Format
Hex 20 11 01 FE
Binary
00100000 00010001
00000001 11111110
Function Addre ss Byte 1 Addre ss Byte 2 Command
Command
(Logical Inver s e)
9 ms
13.5 ms 27 ms 27 ms
Address Byte 1 Leader Pulse Address Byte 2 Command Byte Command Byte (logical inverse)
0 0 1 0 0 0 0 0 0 0 0 1 0 0 0 1 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0
4.5 ms
End Pulse