Runco 3Dimension D-73d Ultra, Руководство по установке и эксплуатации

Страница: 35 / 152

System Overview
D-73d Series Installation/Operation Manual 19
PRE
L
IMINAR
Y
1. IR OUTPUT INDICATOR
Lights when a button is pressed to indicate that an IR signal is being transmitted.
2. LIGHT
Press to illuminate the buttons.
3. ON / OFF
Press to turn the DHD Controller and projector on or off.
4. ENTER
Press to select a highlighted menu item or confirm a changed setting.
5. Cur s or Button s ( , , , )
Use these buttons to select items or settings, adjust settings or switch display
patterns.
When no menu is present on-screen, the UP and DOWN buttons toggle through the
available aspect ratios, in this order:
UP Button = Native - Virtual Cinema - Cinema - VirtualWide - Letterbox - 4:3 - 16:9
DOWN Button = 16:9 - 4:3 - Letterbox - VirtualWide - Cinema - Virtual Cinema -
Native
Likewise, the LEFT and RIGHT buttons toggle through the different source inputs, in
this order:
LEFT Button = HDMI 4 - HDMI 3 - HDMI 2 - HDMI 1 - SCART - HD 2 - HD 1 -
Component - Composite 3 - Composite 2 - Composite 1
RIGHT Button = Composite 1 - Composite 2 - Composite 3 - Component - HD 1 -
HD 2 - SCART - HDMI 1 - HDMI 2 - HDMI 3 - HDMI 4
6. EXIT
Press this button to exit the current menu and return to the previous one.
7. MENU
Press this button to show or hide the OSD controls.
8. Memory Pre s et Button s :
I S F NIGHT
Press to recall settings for the current input from the “ISF Night” memory preset.
I S F DAY
Press to recall settings for the current input from the “ISF Day” memory preset.
CU S T 1
Press to recall settings for the current input from the “Custom 1” memory preset.
CU S T 2
Press to recall settings for the current input from the “Custom 2” memory preset.
9. VID 1 (1) / VID 2 (2) / VID 3 (3)
Press to select a composite video input as the source or to enter the numeric
character “1,” “2” or “3.”
For more information about aspect ratios, refer to Table 4-1.
Note