Runco 3Dimension D-73d Ultra, Руководство по установке и эксплуатации

Страница: 79 / 152

Installation
D-73d Series Installation/Operation Manual 63
PRE
L
IMINAR
Y
Corner/Midpoint Alignment — Cinema (2.35:1) A s pect Ratio:
1. Select the Cinema aspect ratio using either the DHD Controller remote control unit
(see Figure 2-8) or the OSD menu (press MENU , then select A s pect Ratio ->
Cinema ). This should move the anamorphic lenses back into the optical path, in front
of the primary lenses.
2. On the DHD Controller remote control or front panel, press MENU .
3. Select Calibration from the Main Menu.
4. Select Image Alignment from the Calibration Menu.
5. Select Corner Alignment to correct a “keystoned” image by adjusting the image
corner positions. Select Midpoint Alignment to correct pincushion distortion by
adjusting the image edge mid-points. See Figure 3-29.
Corner/Midpoint Alignment — Other A s pect Ratio s :
The DHD Controller saves the Image Alignment (warp) settings for each aspect ratio. To
program additional aspect ratios, select each one and use the controls in the
Corner
Alignment and Midpoint Alignment menus. Or, select Calibration -> Copy/Pa s te ->
A s pect Ratio -> Copy S etting s , select a different aspect ratio and choose Pa s te
S etting s .