Indicator
Panel Identification
Status
Meaning
port indicator
For the
M3000E-STACK
Solid green
The stack port links up.
Blinking green
Data are being transceived at the stack port.
10/100Mbps RJ-45
port indicator
1~24
Off
The port is not connected to a link.
Solid green
The 100 M link that the port connects to is Up.
Blinking green
Data at a rate of 100 M are being transceived at
the port.
Solid yellow
The 10 M link that the port connects to is Up.
Blinking yellow
Data at a rate of 10 M are being transceived at
the port.
1000Mbps SFP
port indicator
25F, 26F
Off
The port is not connected to a link.
Solid green
The 1000 M link that the port connects to is Up.
Blinking green
Data at a rate of 1000 M are being transceived at
the port.
Solid yellow
The 100 M link that the port connects to is Up.
Blinking yellow
Data at a rate of 100 M are being transceived at
the port.
1000Mbps RJ-45
port indicator
25, 26
Off
The port is not connected to a link.
Solid green
The 1000 M link that the port connects to is Up.
Blinking green
Data at a rate of 1000 M are being transceived at
the port.
Solid yellow
The 100 or 10 M link that the port connects to is
Up.
Blinking yellow
Data at a rate of 100 or 10 M are being
transceived at the port.
Table 1-5 Indicators for the RG-S3250E-48
Indicator
Panel Identification
Status
Meaning
Link indicator
Status
Off
The switch is not powered on.
Blinking green
The switch is being initialized. If the blinking
persists, however, it indicates that an
abnormality occurs.
Solid green
Normal switching is performed by the switch.
Solid yellow
It indicates a warning on the switch temperature.
Check the working environment of the switch
immediately.
Solid red
Indicates a fault on the switch. For details, refer
to Section 5.2 Troubleshooting Common Faults.
Extension module
indicator
Module
Off
There is no extension module or the extension
module is not correctly installed.
Solid green
The extension module is correctly installed.
