3.3.4 Mounting the Switch to the Desktop
In several cases, users do not have the 19-inch standard cabinets. In this case, the most frequent method is to
mount the switch to a clean workstation.
Step 1:Attach the four adhesive rubber pads provided in the carton onto the indentations on the four corners at the
bottom of the switch.
Step 2: Place the switch on the desktop flatly to ensure that the air around the switch can flow freely.
3.4 Checking after Installation
Before checking the installation, switch off the power supply so as to avoid any personal injury or damage to the
component due to connection errors.
Check that the ground line is connected.
Check that the cables and power input cables are correctly connected.
Check that all interface cables are laid out inside the equipment room. In the case of external cabling, check
that the lightning resistance socket or network interface lightning protector is connected.
Check that sufficient airflow is available around the device (over 10 cm).
