·
Hardware Installation and Reference Guide Installing the Access Point
Before mounting the AP on the bracket, you must first install the Ethernet cables.
Removing the Access Point
1)
If the AP is locked, insert the key to the bottom of a lock slot, and drive the AP in the corresponding direction as
shown in Figure 3-9. If the AP clicks into place and the key cannot be pulled out, it indicates that the AP is unlocked.
If not, keep trying on another lock slot until you succeed.
Figure 3-9 Inserting the Key for Unlocking
2)
If the AP is installed on the wall, hold the AP in your hands and push it upward to separate it from the bracket in the
LAN port direction.
Figure 3-10 Removing the Wall-Mount AP
