RuggedCom RuggedMC RMC30 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 138

background image

Rugged Operating System

Rugged Operating System: (ROS®) v3.11 User Guide

Copyright

©

2012 RuggedCom Inc.

ALL RIGHTS RESERVED

Dissemination or reproduction of this document, or evaluation and communication of its contents, is not authorized except where
expressly permitted. Violations are liable for damages. All rights reserved, particularly for the purposes of patent application or
trademark registration.

This document contains proprietary information, which is protected by copyright. All rights are reserved. No part of this document may
be photocopied, reproduced or translated to another language without the prior written consent of RuggedCom Inc.

Disclaimer Of Liability

We have checked the contents of this manual against the hardware and software described. However, deviations from the description
cannot be completely ruled out.

RuggedCom shall not be liable for any errors or omissions contained herein or for consequential damages in connection with the
furnishing, performance, or use of this material.

The information given in this document is reviewed regularly and any necessary corrections will be included in subsequent editions.
We appreciate any suggested improvements. We reserve the right to make technical improvements without notice.

Registered Trademarks

RuggedServer™, RuggedWireless™, RuggedCom Discovery Protocol™ (RCDP™), RuggedExplorer™, Enhanced Rapid Spanning
Tree Protocol™ (eRSTP™), are trademarks of RuggedCom Inc. Rugged Operating System® (ROS®) and RuggedSwitch® are
registered trademarks of RuggedCom Inc. Other designations in this manual might be trademarks whose use by third parties for their
own purposes would infringe the rights of the owner.

Warranty

Five (5) years from date of purchase, return to factory. For warranty details, visit

www.ruggedcom.com

or contact your customer

service representative.

Contacting RuggedCom

Corporate Headquarters

US Headquarters

Europe Headquarters

RuggedCom Inc.
300 Applewood Crescent
Concord, Ontario
Canada, L4K 5C7
Tel: +1 905 856 5288
Fax: +1 905 856 1995
Toll-free: 1 888 264 0006

RuggedCom
1930 Harrison St., Suite 209
Hollywood, Florida
USA, 33020
Tel: +1 954 922 7938 ext. 103
Fax: +1 954 922 7984
Toll-free: 1 888 264 0006

RuggedCom
Unit 41, Aztec Centre,
Aztec West, Almondsbury, Bristol
United Kingdom BS32 4TD
Tel: +44 1454 203 404
Fax: +44 1454 203 403

Email:

[email protected]

Technical Support

Toll Free (North America): 1 866 922 7975
International: +1 905 856 5288
Email:

[email protected]

Web:

www.RuggedCom.com

«
1
2
3
4
...
»

Содержание RuggedMC RMC30











































































































































Отзывы:

Нет отзывов

Похожие инструкции для RuggedMC RMC30

Бренд: Cambridge Audio Страницы: 4

Бренд: Cambridge Audio Страницы: 2

Бренд: Eco Drive Страницы: 138

LaCinema Mini HD Connect

Бренд: LaCie Страницы: 4

Бренд: Perle Страницы: 23

HDMI Super Booster Plus

Бренд: Gefen Страницы: 10

Бренд: LC Страницы: 44

Бренд: Vicruns Страницы: 212

Бренд: Power Tech-On Страницы: 27

Бренд: Duracell Страницы: 37

Бренд: Woxcon Страницы: 23

Бренд: Fairport Страницы: 9

Бренд: Tektronix Страницы: 12

Бренд: AIMS Power Страницы: 10

Бренд: A-solar Страницы: 2

Бренд: AXIOMATIC Страницы: 45

Бренд: aqprox! Страницы: 21

Бренд: Schüco Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды