47
This product uses TVS lightning Proof technology,
can prevent from the damage of the equipment caused by
kinds of pulse signal such as instant lightning strike of
power below 4000V, the surge and so on.
At the same time, you must adopt the essential prote-
ctive measure according to the actual situation regarding
outdoor installation under the guarantee electricity security.
(Refer to chapter 1.3 Distributing the line in security)
10. 4
Water Proof
Outdoor PTZ has well waterproof
、
moisture-proof
、
dustproof performance, has achieved the IP67 international
standard.
The indoor PTZ doesn't allowed to install in out-
door environment which is full of moisture and possibly en-
ter water. You should prevent the product and the internal
components from damage that caused by the long time water
-drop or spatter.
10.5 The preparation of installation
The request of the quality of installation
person and maintainer:
●
All installation and maintenance work related this
product should complete by technical personnel who
have qualification of installation and maintenance.
Basic requirements
●
Please refer to this handbook for detail.
●
All electrical work must be observe local latest
electricity laws, regulation on fireproof as well as
the related laws and regulations:
●
Checking everything is completed according to
packing list. Make sure the application place and
the way of installation for PTZ is coincide with
the request. If not, please contact your supplier.
●
Please use this product according to the working
conditions request.
●
Please handle with the pan/tilt module carefully,
do not extrude various structure parts; The down
cover belongs to the senior optics part, do not touch
with hand; Please do not get through power except
for the electrifying inspection in process of installation.
Check the structure intensity for installation
space and installation site.
●
Make sure you have enough space to hold this product
and it's parts of installation in the site.
●
Make sure the bearing capacity of ceiling, wall,
bracket that installs the PTZ support the gross weight
of the PTZ and the structural parts of installation.
It is necessary to have the safe coefficient of 4 times
or above.
10. 3
Lightning Proof and Surge Proof
Ø
Ø
Ø
●
Minimum video coaxial cable requirements:
1)75
Ω
impedance
2)All copper conductor wire
3)95% copper net structure
Ø
Stuff Preparation
Please select the type of cables based on transmitting distance:
RG59/U
750ft
（
229m
）
RG59/U
RG6/U
RG11/U
1,000ft
（
305m
）
1,500ft
（
457m
）
5C-2V
7C-2V
Domestic Gauge
International Gauge
Maximum Distance(ft/m)
●
RS485 Communication cables (Refer to manual appendix)
●
24VAC Power supply cable (Refer to manual appendix)
Please preserve the mode original package material
properly after opening the PTZ packing, in order to
mail the PTZ that is wrapped with original package
material to the agent or return it to the factory to repair
if problem occur.
It is likely to bring on the damage that caused by the
transport accident on the way if the mode uses the
non-original package material, and extra cost may
arise accordingly.
Mounting way of pan/tilt: wall mount, pendant mount.
Ø
Keep All the Original Package Materials
Ø
Brief introduction of mounting way
Bracket Installation Installation position must
enable to undertake high weight pressure
，
which must be 4times of the total weight of PTZ
and bracket.
The wall must be strong and stable, bracket must
be ensure to install on the real wall but not the
surface coating of the wall.
NOTICE
Warnings
