System Setting
18
MAIN MENU
SYSTEM SETTING
CAMERA SETTING
FUNCTION SETTING
WINDOW BLANKING
ALARMS
EXIT
S/N: 4JKAA7824000058
CONF: 4JKAA7824000058
SITE ID 001
COMM SPEED 4800BPS
BACK
EXIT
COMM SETTING
SYSTEM SETTING
EDIT DOME LABEL
INITIAL INFO
DISPLAY SETUP
MOTION
CLEAR
PASSWORD SETTING
CLOCK SETTING
COMM SETTING
BACK
EXIT
1.The system enters into the main menu by calling 95 preset or by calling
9 preset twice within 3 seconds.
2.Click the up and down button to move the cursor to
【
SYSTEM SETTING
】
,
and click the right button to enter into the next menu.
3.Click the up and down button to move the cursor to
【
COMM SETTING
】
,
and clicking the right button to enter into Dome parameter setup
menu.
S/N
: Show Series NO. of the dome ex-work.
CONF
: Using to edit, the series NO. of the dome is the same as S/N
series Number.
SITE ID
: Setting up the ID Number of the dome, address scope (001-255).
COMM SPEED: Baud rate setup. The user can choose 4 kinds of Baud-
rate (2400 BPS, 4800 BPS, 9600 BPS, 19200 BPS).
4. 9 Setup Dome parameter
Remark: below operation can not be continue when above
two series Number are not the same.
PROTOCOL
:set protocol,the user can choose 16 kinds of protocol:
PELCO
、
FACTORY
、
DYNACOLOR
、
ISD
、
HUNDA
、
VIDO B02
、
LILIN
、
KALATEL
、
DIAMOND
、
SAMSUNG
、
PANASONIC
、
SANTACHI
、
VICON
、
MOLYNX
、
VCL
、
SAE.
Notice
：
when you set the
【
COMM SETTING
】
,all the
code switch SW1 and SW2 are set to
【
ON
】
.
