Rugged CCTV Night Ranger, Руководство пользователя

Страница: 30 / 55

EDIT PRESET LABEL
LABEL ： PRESET-05
BACK
EXIT
Function setting
27
MAIN MENU
SYSTEM SETTING
CAMERA SETTING
FUNCTION SETTING
WINDOW BLANKING
ALARMS
EXIT
FUNCTION SETTING
PRESETS
SCAN
PATTERNS
TOUR
ZONES
TIME RUNNING
BACK
EXIT
PRESET NUMBER 05
SET PRESET
SHOW PRESET
CLEAR PRESET
AUTO TARCKING NONE
EDIT PRESET LABEL
BACK
EXIT
PRESETS
6. 1 Preset
6. Function setting
1
“ ”
Define
【 】
【 】
【 】 【 】
【 】
【 】
【 】
5 【 】 【 】
. The system enters into the main menu by calling 95 preset or by calling
9 preset twice within 3 seconds. Click each command to enter preset menu
according to the order of the left picture. As follows:
preset and call preset function can be set by keyboard operation,
input preset number at first, then click the key “ save /call preset ” to carry out.
2. Define current preset number: move the cursor to PRESET NUMBER ,
press OPEN to choose preset number, the range is 1-128 as the left picture
shows, here chooses number 5 as current preset, the following operations aim at
the current preset.
3. Define current preset: move the cursor to SET PRESET ,press OPEN ,
by operating joystick to adjust magnification, to choose good objective image,
press OPEN to save. If the image is very near, the Image is belong in digital
zoom. When setting preset, the image will jump to maximal optical zoom.
4. Display current preset: move the cursor to SHOW PRESET , press
OPEN , the screen will display the current preset;
. Clear current preset: move the cursor to CLEAR PRESET , press OPEN ,
the current preset is cleared.
Preset function is that dome stores current pan/tilt angle, zoom
and other position parameters into the memory. When necessary,dome
recalls these parameters and adjust camera to that position.
OPERATION KNACKS
1.When running to program, display, clear preset and edit label,
should choose preset number at first.
2. The label may set up to 16 characters, and doesn't need editing
characters. Press OPEN continuously to jump over and use
spacebar to replace the deleted characters. When you finish to
edit a character, press OPEN to enter into the next editing
character; when you finish to edit the last character, pressing
OPEN to save. Press CLOSE to exit. Character of label
is suitable for choosing as follow: 0-9, A-Z, :<>-. , space.
【 】
【 】
【 】 【 】
NOTICE
●
【 PRESET NUMBER 】
●
【 SET PRESET 】
●
【 SHOW PRESET 】
●
【 CLEAR PRESET 】
●
【 AUTO TARCKING 】 (If the dome does not have this function, it won t display )
●
【 EDIT PRESET LABEL 】