ruegg CLASSIC-LINE, Инструкция по эксплуатации, Страница: 13 / 28

CLASSIC-LINE
ECO-LINE
Instruction manual
13
Ignition
1 OPEN the convection air regulator* completely
*if the system is fitted with one
→
Pull out the control
2 OPEN the combustion air regulator* completely
*if the system is fitted with one
→
Pull out the control
3 OPEN the air inlet control completely
→
Slide it to the right
4 OPEN the fireplace door
5 OPEN the smoke regulator completely *
* if the system is fitted with one
→
Turn the button to the left or right (depending on
the opening direction)
6 STACK the wood and place the fire-lighter system
on top
→
Stack logs inside the fireplace, making sure you do
not exceed the authorized load.
→
Place the fire-lighter system, comprising 4 to 6 thin
sticks of resinous wood and 1 or 2 fire-lighters,
made, for example, of wax-impregnated wood
wool.
Do not exceed the maximum loads given
on page 7!
7 LIGHT the firelighter using a match
You can find further information on lighting the
wood on the following websites:
www.ruegg-cheminee.com
www.holzenergie.ch
www.fairfeuern.ch
8 CLOSE the fireplace door
→
If not enough air is drawn in to allow proper
ignition, leave the door slightly open (about 2 cm)
for 5 minutes.
9 OPEN the hot convection air vent completely *
*if the system is fitted with one
→
Push the control upwards or downwards
(depending on the opening direction)
Fire-lighter
firewood