RTW TouchMonitor TM3-3G, Руководство пользователя, Страница: 111 / 174

EN-23 Manual | TM3-3GS 3 | Operation | 3.3 | Loading vertical and horizontal Presets
EN
Horizontal display mode
In order to use the TM3-3GS in horizontal display mode, rotate the display
unit to the left so that the base is positioned on the right hand side.
Wipe across the touchscreen with your fi nger in horizontal direction to
switch the unit to horizontal display mode and to browse through the
available presets in that mode. Each preset will be presented with its na-
me and a preview illustration of the instruments and display layout used.
Touch the white circled arrow button in the center to load a preset.
To select any other preset, just wipe again.
In order to switch the TM3-3GS back to vertical display mode, just place the
display unit in its upright position again and wipe across the touchscreen
in either horizontal direction to browse through the available presets.
NOTE - Please note that the TM3-3GS recognizes the wipe ori-
entation (lengthwise or crosswise) in order to switch between vertical and
horizontal display modes. It doesn‘t use a motion sensor for this.