Peakmeter 11528G Series
Calibration and Troubleshooting Page 6-3
6.4. Sandwichscale and scale change
The unit is delivered with a visible horizontal scale and a vertical scale which
is mounted underneath.
For vertical mounting direction remove the upper horizontal scale by using
the added 'liftoff strip'.
You can also use a normal selfadhesive tape:
Press the selfadhesive tape onto the
right end (correlator side) of the
horizontal scale (fig 1).
Pull back the tape in direction of the
arrow (fig 2). The vertical scale can
be seen now; the unit is ready to be
installed.
Do not pull upwards ! Do not use force !
Important:
The correlator requires a correct setting by the use of the
mounting direction input for appropriate display in vertical mode:
Connect pin 18c to pin 19c
h o r i z o n t a l
s c a l e
ve
rtic
al
sc
ale
1
2
Connection:
Page 4-1.
All manuals and user guides at all-guides.com
all-guides.com