RTI VHD-8, Инструкция по установке и эксплуатации, Страница: 17 / 32

17
It’s Under Control
®
2) All input ports learn EDID data from one output port
Operation: Press EDID + ALL + OENTER
Example: All input ports learn EDID data from output 4
Note: Indicators of the pressed buttons will blink green for three times if the switch is
done, then turn off. If the switch operation failed, they will be off immediately.
EDID INVOKING
There are six types of embedded EDID data. The chart below illustrates the detailed
information of the embedded EDID data:
Press and hold EDID for 3 seconds to enter EDID invoking mode. In this mode, use output
buttons 1-6 to switch among the 6 embedded EDID data. Then press ENTER to confirm
invoking.
Format: Press and hold EDID for 3 s OUTPUTS 1-6 + ENTER.
Operations:
1) Invoke embedded EDID data for one input
Operation: Press EDID (hold for 3 seconds) + OENTER
Example: Set the EDID data of INPUT 2 to the forth type of embedded EDID data:
Note: Indicators of the pressed buttons will blink green for three times if the switch is
done, then turn off. If the switch operation failed, they will be off immediately.
CHAPTER 3 | INSTALLATION AND OPERATION
OUTPUTS
4
ENTER ALL EDID
Output Button EDID Data
1 1080P 2D 2CH
2 1080P 3D 2CH
3 1080P 2D Multichannel
4 1080P 3D Multichannel
5 3840x2160 2D (30Hz)
6 4096x2160 2D 30Hz
INPUTS
2
EDID
OUTPUTS
4
ENTER
Hold for 3
seconds
To switch
to the 4th
EDID data