RTI VHD-8, Инструкция по установке и эксплуатации, Страница: 16 / 32

8x8 HDBT Video Matrix Switch
VHD-8
16
CHAPTER 3 | INSTALLATION AND OPERATION
FRONT PANEL CONTROL
The VHD-8 provides control via the front panel buttons. Below is an introduction to the
system operations.
Switching I/O connection
1) To convert one input to an output:
Operation: Select INPUT + ENTER
Example: Input 1 to Output 2
2) To switch an input to several outputs:
Operation: Select INPUT + ENTER
Example: Switch input 2 to output 2, 4
3) To switch an input to all outputs:
Operation: Select INPUT + ALL + ENTER
Example: Switch input 1 to all outputs
Note: Indicators of the pressed buttons will blink green for three times if the switch is
done, then turn off. If the switch operation failed, they will be off immediately.
EDID MANAGEMENT
The VHD-8 features EDID management to maintain compatibility between all devices.
It can be controlled via EDID learning and EDID invoking.
EDID Learning (from output):
1) One input port learns the EDID data of one output port
Operation: Press EDID, Select O ENTER.
Example: Input 2 learns EDID data from output 4
INPUTS
1
OUTPUTS
2
ENTER
INPUTS
1
OUTPUTS
2
ENTER
OUTPUTS
4
INPUTS
2 EDID
OUTPUTS
4
ENTER
INPUTS
1
ALL ENTER