RTI RTiDock, Инструкция по установке и эксплуатации

Страница: 27 / 52

27
It’s Under Control
®
ADJUST POWER CONTROL AND LED SETTINGS
1) From the CONFIGURATION MENU select OTHER SETTINGS.
2) Navigate to the setting that needs to be adjusted using the cursor controls (UP/
DOWN) on the remote control.
3) Send the SELECT command to “highlight” the setting.
4) Use the cursor controls (UP/DOWN) on the remote control to adjust the setting.
5) Send the SELECT command to accept the setting.
SETTINGS
• Power control
Enabled = This is the Power Save and default mode. It allows the power on/off
commands to function. In this mode, less than 1 Watt of electricity is consumed
until the unit wakes up due to activity.
Disabled = In this mode, the RTiDock is always powered on.
• LED control
Reflect power status = The blue LED’s will be turned off when the Power Save
mode is activated.
OFF = The blue LED’s will be turned off.
CHAPTER 4 | CONFIGURE SETTINGS