RTI RTiDock, Инструкция по установке и эксплуатации

Страница: 20 / 52

RTiDock
20
RTIDOCK
ARTWORK TEMPLATE
SEPTEMBER 15, 2010
POWER RESET ETHERNET RS-232 IR INPUT COMPONENT VIDEO AUDIO USB
Y PB PR S/PDIF LEFT RIGHT
RTIDOCK
ARTWORK TEMPLATE
SEPTEMBER 15, 2010
POWER RESET ETHERNET RS-232 IR INPUT COMPONENT VIDEO AUDIO USB
Y PB PR S/PDIF LEFT RIGHT
Source 1
Tuner
Audio
Out
AUDIO OUTPUT
RTiDock
Distributed Audio System
The RTiDock has an analog and a digital audio output. Both may be connected
simultaneously for output to different devices. The digital
(S/PDIF) audio output is recommended for best audio quality.
ANALOG AUDIO
• Using an audio cable with RCA connectors, connect to the analog outputs (left/
right) on the rear of the RTiDock. Connect the opposite end of the cable to your
audio system (distributed audio system, receiver etc).
RTiDock
Receiver
DIGITAL AUDIO (S/PDIF)
• Using a digital audio cable with an RCA plug, connect to the digital audio output
(S/PDIF) on the rear of the RTiDock. Connect the opposite end of the cable to your
audio system equipped with a digital input (distributed audio system, receiver etc).
CHAPTER 3 | CABLES AND CONTROL