RTI RTiDock, Инструкция по установке и эксплуатации

Страница: 18 / 52

RTiDock
18
RS-232 CONTROL OF RTiDOCK
RS-232 control provides one-way control of the RTiDock and metadata feedback
(such as current song info, music library browsing etc.) from a two-way capable RTI
control system (control processor and controller). A set of RS-232 codes is available
in the RTI Integration Designer programming software and RTI’s website (accessible
to RTI dealers only).
NOTE: Album art feedback on an RTI control system requires the use of Ethernet
networking. Album art is not provided via two-way RS-232.
1) Plug Cat-5 cable to RS-232 port on RTiDock (RJ-45 termination using 568B
standard).
2) Connect opposite end of Cat-5 cable.
• Two-way control: Plug directly into dedicated RS-232 port on RTI control processor.
(RJ-45 termination using 568B standard).
OR
• One-way control: Plug into RJ-45>DB-9 adapter that is connected to an RS-232
cable (RTI CM-232 module) from a one-way RTI control processor or third-party
control system.
RTIDOCK
ARTWORK TEMPLATE
SEPTEMBER 15, 2010
POWER RESET ETHERNET RS-232 IR INPUT COMPONENT VIDEO AUDIO USB
Y PB PR S/PDIF LEFT RIGHT
Control
Processor
RS-232 port
CHAPTER 3 | CABLES AND CONTROL
RTIDOCK
ARTWORK TEMPLATE
SEPTEMBER 15, 2010
POWER RESET ETHERNET RS-232 IR INPUT COMPONENT VIDEO AUDIO USB
Y PB PR S/PDIF LEFT RIGHT
Connection Settings:
Baud rate: 9600
Data bits: 8
Parity: None
Stop bits: 1
RJ-45 Jack Pinout:
1 RI/DSR Data Set Ready
2 DCD Carrier Detect
3 DTR Data Terminal Ready
4 GND Ground
5 RXD Receive Data
6 TXD Transmit Data
7 CTS Clear to Send
8 RTS Request to Send